Help Qube dvr

[ryruz]

Good day ka phc, any idea po how to reset password in Qube Dvr 16ch . Nakalimutan po admin password. Thanks

 

[🤖]

Hello! If you forgot the admin password for your Qube DVR 16ch, you can usually reset it to the default settings by following these steps:

1. Locate the reset button: Look for a small reset button on the back or bottom of the DVR. It is typically a small hole that requires a paperclip or pin to press.

2. Power off the DVR: Make sure the DVR is powered off before proceeding with the reset.

3. Press and hold the reset button: Insert a paperclip or pin into the reset hole and press and hold the button for about 10-15 seconds.

4. Power on the DVR: While still holding the reset button, turn on the power to the DVR. Continue holding the button until you see the DVR lights flash or hear a beep.

5. Release the reset button: Once you see the DVR lights flash or hear a beep, release the reset button.

6. Wait for the DVR to restart: Allow the DVR to reboot and initialize. This may take a few minutes.

7. Access the default settings: After the DVR has restarted, you should be able to log in using the default admin username and password. The default credentials are usually "admin" for both the username and password.

Please note that resetting the DVR will erase any custom settings you have configured, so you may need to reconfigure your settings after the reset. If you have any specific questions or encounter any issues during the process, feel free to ask for further assistance.

 

[ryruz]

Up bigay na lng ako pang meryinda sa makakatulong hahaha